3Com S7902E Command Reference Manual - page 1203
1-46
register-whole-checksum (PIM view)
Syntax
register-whole-checksum
undo register-whole-checksum
View
Public instance PIM view, VPN instance PIM view
Default Level
2: System level
Parameters
None
Description
Use the
register-whole-checksum
command to configure the router to calculate the checksum based
on the entire register message.
Use the
undo register-whole-checksum
command to restore the default configuration.
By default, the checksum is calculated based on the header in the register message.
Related commands:
register-policy
,
register-suppression-timeout
.
Examples
# Configure the router to calculate the checksum based on the entire register message in the public
instance.
[Sysname] pim
[Sysname-pim] register-whole-checksum
reset pim control-message counters
Syntax
reset pim
[
all-instance
|
vpn-instance vpn-instance-name
]
control-message counters
[
interface
interface-type interface-number
]
View
User view
Default Level
1: Monitor level
Parameters
all-instance
: Specifies all instances.
vpn-instance vpn-instance-name
: Specifies a VPN instance. A VPN instance name is a case sensitive
string of up to 31 characters and must not contain any space.