3Com S7902E Command Reference Manual - page 323
1-13
Description
Use the
display onu-event
interface
command to display the registration and deregistration records of
an ONU.
The system supports up to 50 records for each ONU. After the number of records for an ONU
reaches this maximum number, the old records will be overwritten by the new ones.
If an ONU port is unbound from its ONU or the EPON card is reset, records will be cleared.
Examples
# Display the registration and deregistration information of the ONU.
Date Time ONU Event ONU Status
2007/07/28 13:57:03 Registration Down
2007/07/28 18:00:06 Deregistration Up
Table 1-9 display onu-event interface
command output description
Field
Description
Date
Date of the ONU event
Time
Time of the ONU event
ONU Event
ONU event:
Registration
Deregistration
ONU Status
ONU status when an ONU event occurs:
Up: when the ONU status is up, the ONU is deregistered.
Down: when the ONU status is down, the ONU is registered.
display onuinfo
Syntax
display onuinfo
{
interface interface-type interface-number | slot slot-number
}
View
Any view
Default Level
2: System level
Parameters
interface-type
: Port type, which can be
OLT
or
ONU
.
interface-number
: OLT/ONU port number.