3Com S7902E Command Reference Manual - page 1976
1-15
parity
Syntax
parity
{
even
|
mark
|
none
|
odd
|
space
}
undo parity
View
AUX interface view
Default Level
2: System level
Parameters
even
: Performs even checks.
mark
: Performs mark checks.
none
: Does not check.
odd
: Performs odd checks.
space
: Performs space checks.
Description
Use the
parity
command to set the check mode of the user interface.
Use the
undo parity
command to revert to the default check mode.
No check is performed by default.
3Com S7900E series Ethernet switches support the
even
,
none
, and
odd
check modes only. To
establish the connection again, you need to modify the configuration of the termination emulation utility
running on your PC accordingly.
Examples
# Set to perform mark checks.
System View: return to User View with Ctrl+Z.
[Sysname] user-interface aux 0
[Sysname-ui-aux0] parity mark
protocol inbound
Syntax
protocol inbound
{
all
|
ssh
|
telnet
}