3Com S7902E Command Reference Manual - page 1356
1-17
mld startup-query-count
Syntax
mld startup-query-count
value
undo mld startup-query-count
View
Interface view
Default Level
2: System level
Parameters
value
: Startup query count, namely, the number of queries the MLD querier sends on startup, with an
effective range of 2 to 5.
Description
Use the
mld startup-query-count
command to configure the startup query count on the current
interface.
Use the
undo mld startup-query-count
command to restore the system default.
By default, the startup query count is set to the MLD querier robustness variable.
By default, the MLD querier robustness variable is 2, so the startup query count is also 2.
Related commands:
startup-query-count
,
mld robust-count
.
Examples
# Set the startup query count to 3 on VLAN-interface 100.
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] mld startup-query-count 3
mld startup-query-interval
Syntax
mld startup-query-interval
interval
undo mld startup-query-interval
View
Interface view