3Com S7902E Command Reference Manual - page 740
1-8
Default Level
2: System level
Parameters
description
: Configures a description for the OSPF process in OSPF view, or for the OSPF area in
OSPF area view.
description
is a string of up to 80 characters.
Description
Use the
description
command to configure a description for an OSPF process or area.
Use the
undo description
command to remove the description.
No description is configured by default.
Use of this command is only for the identification of an OSPF process or area. The description has no
special meaning.
Examples
# Describe the OSPF process 100 as
abc
.
[Sysname] ospf 100
[Sysname-ospf-100] description abc
# Describe the OSPF area0 as
bone area
.
[Sysname] ospf 100
[Sysname-ospf-100] area 0
[Sysname-ospf-100-area-0.0.0.0] description bone area
display ospf abr-asbr
Syntax
display ospf
[
process-id
]
abr-asbr
View
Any view
Default Level
1: Monitor level
Parameters
process-id
: OSPF process ID, in the range 1 to 65535. Use this argument to display information about
the routes to the ABR/ASBR under the specified OSPF process.
Description
Use the
display ospf abr-asbr
command to display information about the routes to OSPF ABR/ASBR.
If you use this command on routers in a stub area, no ASBR information is displayed.