3Com S7902E Command Reference Manual - page 1631
1-19
The following table gives the description on the fields of the
display bgp vpnv4 route-distinguisher
routing-table
command.
Table 1-11
Output description
Field
Description
BGP Local router ID
Router ID of the local BGP router
Status codes
Route status codes. For valid values, see
Table 1-1
.
Origin
Route origin codes. For valid values, see
Table 1-1
.
Network Network
address in the BGP routing table
NextHop
Address of the next hop
In/Out Label
Incoming/outgoing label
MED
Metric associated with the destination network
LocPrf Local
preference
Total Number of Routes
Total number of routes of the specified VPN instance
display bgp vpnv4 routing-table label
Syntax
display bgp
vpnv4
{
all
|
vpn-instance
vpn-instance-name
}
routing-table label
View
Any view
Default Level
1: Monitor level
Parameters
all
: Specifies all VPNv4 peers.
vpn-instance-name
: Name of the VPN instance, a string of 1 to 31 characters.
Description
Use the
display bgp vpnv4 routing-table label
command to display information about labeled routes
in the BGP routing table.
Examples
# Display information about labeled routes in the BGP routing table.
BGP Local router ID is 2.2.2.2
Status codes: * - valid, > - best, d - damped,
h - history, i - internal, s - suppressed, S - Stale
Origin : i - IGP, e - EGP, ? - incomplete