3Com S7902E Command Reference Manual - page 351
2-13
View
ONU port view
Default Level
2: System level
Parameters
None
Description
Use the
encrypt enable
command to encrypt downstream data.
Use the
undo encrypt enable
command to disable stream encryption.
By default, encryption is enabled for downstream data.
Examples
# Enable downstream data encryption.
[Sysname] interface onu 3/0/1:1
[Sysname-Onu3/0/1:1] encrypt enable
encrypt key
Syntax
encrypt key key-value
undo encrypt key
View
ONU port view
Default Level
2: System level
Parameters
key-value
: Encryption key, a string of up to 16 characters.
Description
Use the
encrypt key
command to configure the encryption key.
Use the
undo encrypt
command to restore the default encryption key.
This command takes effect on H3C ONUs only.
Currently, the
encrypt key
command is not supported.