3Com S7902E Command Reference Manual - page 691
1-22
display ipv6 relay-route
Syntax
display ipv6 relay-route
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the
display ipv6 relay-route
command to display IPv6 recursive route information.
Examples
# Display IPv6 recursive route information.
Total Number of relay-route is: 1
Dest/Mask: 192::1/64
Related instance id(always 0): 0(1)
Table 1-9 display ipv6 relay-route
command output description
Field
Description
Total Number of Relay-route
Total number of recursive routes
Dest/Mask Destination
address/mask of the recursive route
Related instance id(always 0)
IPv6 supports public networks only. Therefore, the instance
ID can be 0 only.
The number in the parentheses after the instance ID
indicates the number of routes that have used the recursive
route in the routing table.
display ipv6 relay-tunnel
Syntax
display ipv6 relay-tunnel
View
Any view
Default Level
1: Monitor level