3Com S7902E Command Reference Manual - page 1445
1-23
h - history, i - internal, s - suppressed, S - Stale
Origin : i - IGP, e - EGP, ? - incomplete
*d Network : 111:: PrefixLen : 64
From : 122::1 Flaps : 3
Duration : 00:13:47 Reuse : 00:16:36
Path/Ogn : 200?
Table 1-10 display bgp ipv6 multicast routing-table flap-info
command output description
Field
Description
Flaps
Number of flaps
Duration
Duration of the flapping
Reuse Reuse
value
Refer to
Table 1-7
for description on the other fields above.
display bgp ipv6 multicast routing-table peer
Syntax
display bgp ipv6 multicast routing-table peer ipv6-address
{
advertised-routes
|
received-routes
}
[
network-address prefix-length
|
statistic
]
View
Any view
Default Level
1: Monitor level
Parameters
ipv6-address
: Specifies the IPv6 peer to be displayed.
advertised-routes
: Routing information advertised to the specified peer.
received-routes
: Routing information received from the specified peer.
network-address prefix-length
: IPv6 address and prefix length. The prefix length ranges from 0 to 128.
statistic
: Displays route statistics.
Description
Use the
display bgp ipv6 multicast routing-table peer
command to display the routing information
advertised to or received from the specified IPv6 MBGP peer.
Examples
# Display the routing information advertised to the specified IPv6 MBGP peer.
Total Number of Routes: 2
BGP Local router ID is 20.20.20.1