3Com S7902E Command Reference Manual - page 683
1-14
Parameters
None
Description
Use the
display ip relay-tunnel
command to display recursive tunnel information.
Examples
# Display recursive tunnel information.
Total Number of Relay-tunnel is: 1.
Dest/Mask: 40.40.40.40/255.255.255.255
Related instance id(s): 1(1) 2(1) 3(1) 4(1)
Table 1-5 display ip relay-tunnel
command output description
Field
Description
Total Number of Relay-tunnel
Total number of recursive tunnels
Dest/Mask Destination
address/mask of the recursive tunnel
Related instance id(s)
The number in the parentheses after each instance ID
indicates the number of routes that have used the recursive
tunnel in the routing table corresponding to the instance ID.
display ipv6 routing-table
Syntax
display ipv6 routing-table
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the
display ipv6 routing-table
command to display brief routing table information, including
destination IP address and prefix, protocol type, priority, metric, next hop and outbound interface.
The command displays only active routes, namely, the brief information about the current optimal
routes.
Examples
# Display brief routing table information
Routing Table :