3Com S7902E Command Reference Manual - page 1433
1-11
display bgp ipv6 multicast group
Syntax
display bgp ipv6 multicast group
[
ipv6-group-name
]
View
Any view
Default Level
1: Monitor level
Parameters
ipv6-group-name
: Peer group name, a string of 1 to 47 characters.
Description
Use the
display bgp ipv6 multicast group
command to display IPv6 MBGP peer group information.
If no
ipv6-group-name
is specified, information about all peer groups is displayed.
Examples
# Display information about the IPv6 MBGP peer group
aaa
.
BGP peer-group is aaa
remote AS number not specified
Type : external
Maximum allowed prefix number: 4294967295
Threshold: 75%
Configured hold timer value: 180
Keepalive timer value: 60
Minimum time between advertisement runs is 30 seconds
Peer Preferred Value: 0
No routing policy is configured
Members:
Peer V AS MsgRcvd MsgSent OutQ PrefRcv Up/Down State
20:20::20:1 4 200 170 141 0 2 02:13:35 Established
Table 1-3 display bgp ipv6 multicast group
command output description
Field
Description
BGP peer-group
Name of the IPv6 MBGP peer group
remote AS
AS number of the IPv6 MBGP peer group
Type
Type of the IPv6 MBGP peer group:
Maximum allowed prefix number
Maximum number of prefixes allowed to receive
from the IPv6 MBGP peer group
Threshold Threshold
value