3Com S7902E Command Reference Manual - page 613
1-5
Field
Description
Flags
Flag indicating the type of mapping between a host name and an IPv6
address. Static indicates a static mapping.
IPv6Address
IPv6 address of a host
display ipv6 interface
Syntax
display ipv6 interface
[
interface-type
[
interface-number
] ] [
verbose
]
View
Any view
Default Level
1: Monitor level
Parameters
interface-type
: Interface type.
interface-number
: Interface number.
verbose
: Displays the detailed IPv6 information of an interface.
Description
Use the
display ipv6 interface
command to display the IPv6 information of an interface for which an
IPv6 address can be configured.
If
interface-type interface-number
is not specified, the IPv6 information of all interfaces for which IPv6
addresses can be configured is displayed; if only
interface-type
is specified, the IPv6 information of the
interfaces of the specified type for which IPv6 addresses can be configured is displayed; if
interface-type interface-number
is specified, the IPv6 information of the specified interface is displayed.
If the
verbose
keyword is also specified, the detailed IPv6 information of the interface is displayed.
Examples
# Display the IPv6 information of VLAN-interface 2.
Vlan-interface2 current state :UP
Line protocol current state :UP
IPv6 is enabled, link-local address is FE80::1234:56FF:FE65:4322
Global unicast address(es):
2001::1, subnet is 2001::/64
Joined group address(es):
FF02::1:FF00:1
FF02::1:FF65:4322
FF02::2
FF02::1
MTU is 1500 bytes
ND DAD is enabled, number of DAD attempts: 1