3Com S7902E Command Reference Manual - page 977
1-18
Router-LSA 0.0.0.0 12.1.1.1 0x80000014 774 0xe5b0
Table 1-12
display ospfv3 retrans-list
command output description
Field
Description
Interface Interface
name
Area-ID Area
ID
Nbr-ID
Neighbor router ID
LS-Type
Type of LSA
LS-ID Link
state
ID
AdvRouter
Advertising Router
SeqNum
LSA sequence Number
Age
Age of LSA
CkSum Checksum
# Display the statistics of OSPFv3 link state retransmission list.
OSPFv3 Router with ID (11.1.1.1) (Process 1)
Interface Neighbor LSA-Count
Vlan100 12.1.1.1 2
Table 1-13
display ospfv3 retrans-list statistics command output description
Field
Description
Interface Interface
name
Neighbor Neighbor
ID
LSA-Count
Number of LSAs in the retransmission request list
display ospfv3 routing
Syntax
display ospfv3
[
process-id
]
routing
[
ipv6-addressprefix-length
| ipv6-address/prefix-length |
abr-routes
|
asbr-routes
|
all | statistics
]
View
Any view
Default Level
1: Monitor level
Parameters
process-id
: Specifies the ID of an OSPFv3 process, ranging from 1 to 65535.
ipv6-address
: IPv6 address prefix.
prefix-length
: Prefix length, in the range 0 to 128.