3Com S7902E Command Reference Manual - page 1364
1-25
Related commands:
mld robust-count
,
last-listener-query-interval
,
timer other-querier-present
,
display mld interface
.
Examples
# Set the MLD querier robustness variable to 3 globally.
[Sysname] mld
[Sysname-mld] robust-count 3
send-router-alert (MLD view)
Syntax
send-router-alert
undo send-router-alert
View
MLD view
Default Level
2: System level
Parameters
None
Description
Use the
send-router-alert
command to globally enable the insertion of the Router-Alert option into
MLD messages to be sent.
Use the
undo send-router-alert
command to globally disable the insertion of the Router-Alert option
into MLD messages to be sent.
By default, MLD messages carry the Router-Alert option.
Related commands:
mld send-router-alert
,
require-router-alert
.
Examples
# Globally disable insertion of the Router-Alert option into MLD messages to be sent.
[Sysname] mld
[Sysname-mld] undo send-router-alert
ssm-mapping (MLD view)
Syntax
ssm-mapping
ipv6-group-address
prefix-length
ipv6-source-address
undo ssm-mapping
{
ipv6-group-address
prefix-length
ipv6-source-address
|
all
}
View
MLD view