3Com S7902E Command Reference Manual - page 1839
1-1
1
MAC Authentication Configuration Commands
MAC Authentication Configuration Commands
display mac-authentication
Syntax
display mac-authentication
[
interface
interface-list
]
View
Any view
Default Level
2: System level
Parameters
interface interface-list
: Specifies an Ethernet port list, in the format of {
interface-type interface-number
[
to
interface-type interface-number
] }&, where & indicates that you can specify up to 10
port ranges. A port range defined without the
to
interface-type interface-number
portion comprises only
one port. With an interface range, the end interface number and the start interface number must be of
the same type and the former must be greater than the latter.
Description
Use the
display mac-authentication
command to display global MAC authentication information or
MAC authentication information about specified ports.
Examples
# Display global MAC authentication information.
MAC address authentication is enabled.
User name format is MAC address, like xxxxxxxxxxxx
Fixed username:mac
Fixed password:not configured
Offline detect period is 300s
Quiet period is 60s.
Server response timeout value is 100s
the max allowed user number is 2048 per slot
Current user number amounts to 0
Current domain: not configured, use default domain
Silent Mac User info:
MAC Addr From Port Port Index
GigabitEthernet2/0/1 is link-up