3Com S7902E Command Reference Manual - page 2255
1-10
Description
Use the
history-records
command to configure the maximum number of history records that can be
saved in a test group.
Use the
undo history-records
command to restore the default.
By default, the maximum number of records that can be saved in a test group is 50.
If the number of history records exceeds the maximum number, the earliest history record for a probe
will be discarded.
Examples
# Configure the maximum number of history records that can be saved in a test group as 10.
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] history-records 10
http-version
Syntax
http-version v1.0
undo http-version
View
HTTP test type view
Default Level
2: System level
Parameters
v1.0
: The HTTP version is 1.0 in an HTTP test.
Description
Use the
http-version
command to configure the HTTP version used in an HTTP test.
Use the
undo http-version
command to restore the default.
By default, HTTP 1.0 is used in an HTTP test.
Examples
# Configure the HTTP version as 1.0 in an HTTP test.
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type http
[Sysname-nqa-admin-test-http] http-version v1.0