3Com S7902E Command Reference Manual - page 1534
1-2
# Display all ILM entries.
Inlabel In-Interface Token VRF-Index Oper LSP-Type Swap-Label
--------------------------------------------------------------------------
1024 Vlan2 2 0 POP NORMAL ----
Table 1-1 display mpls ilm
command output description
Field
Description
Inlabel Incoming
label
In-Interface Incoming
interface
Token
NHLFE entry index
VRF-Index VRF
index
Oper Operation
type
LSP-Type LSP
type
Swap-Label
Label for swapping
display mpls interface
Syntax
display mpls interface
[
interface-type
interface-number
] [
verbose
]
View
Any view
Default Level
1: Monitor level
Parameters
interface-type interface-number
: Specifies an interface by its type and number.
verbose
: Displays detailed information.
Description
Use the
display mpls interface
command to display information about one or all interfaces with MPLS
enabled.
Related commands:
display mpls statistics interface
,
mpls
.
Examples
# Display information about all interfaces with MPLS enabled.
Interface Status TE Attr LSP Count CRLSP Count
Vlan1 Up En 0 0
Vlan2 Up En 0 0
# Display detailed information about MPLS-enabled interface Vlan-interface 2.