3Com S7902E Command Reference Manual - page 2038
1-24
Examples
# Clear the 16-bit index saved but not used in the current system.
Current operation will delete all unused port tag(s). Continue? [Y/N]:y
schedule job
Syntax
schedule job
{
at
time1
[
date
] |
delay
time2
}
view view
command
undo schedule job
View
User view
Default Level
3: Manage level
Parameters
at
time1
[
date
]: Specifies the execution time of a specified command.
z
time1
: Execution time of the command, in the format of
hh:mm
(hour/minute). The
hh
value ranges
from 0 to 23, and the
mm
value ranges from 0 to 59. The value of
hh:mm
cannot exceed 23:59.
z
date
: Execution date of the command, in the format of
MM/DD/YYYY
(month/day/year) or
YYYY/MM/DD
(year/month/day). The
YYYY
value ranges from 2000 to 2035, the
MM
value ranges
from 1 to 12, and the
DD
value range depends on a specific month.
delay
time2
: Specifies the execution waiting time of a specified command.
time2 represents the waiting
time,
which can be in the following format:
z
hh:mm
(hour/minute): The
hh
value ranges from 0 to 720, and the
mm
value ranges from 0 to 59.
The value of
hh:mm
cannot exceed 720:00.
z
mm
(minute): It ranges from 0 to 432000, with 0 indicating that a command is executed immediately
without any delay.
view view
: Specifies the view in which a command is executed.
view
represents the view name, and it
takes the following values at present:
z
shell
, represents user view.
z
system
, represents system view.
command
: The command string to be automatically executed at the scheduled time.
Description
Use the
schedule job
command to automatically execute a specified command at the scheduled time.
Use the
undo schedule job
command to remove the configuration.
Note the following:
z
If you provide both the
time1
and
date
arguments, the execution time must be a future time.