3Com S7902E Command Reference Manual - page 1638
1-26
With neither process ID nor area ID specified, the command displays information about all configured
sham links.
Related commands:
sham-link
.
Examples
# Display information about all OSPF sham links.
OSPF Process 100 with Router ID 100.1.1.2
Sham Link:
Area RouterId Source-IP Destination-IP State Cost
0.0.0.1 100.1.1.2 3.3.3.3 5.5.5.5 P-2-P 10
Table 1-18 display ospf sham-link
command output description
Field
Description
Area
OSPF area to which the sham link belongs
RouterId
Router ID of the sham link
Source-IP
Source IP address of the sham link
Destination-IP
Destination IP address of the sham link
State
Status of the sham link interface
Cost
Cost of the sham link
# Display information about OSPF sham links in area 1.
OSPF Process 100 with Router ID 100.1.1.2
Sham-Link: 3.3.3.3 --> 5.5.5.5
Neighbour State: Full
Area: 0.0.0.1
Cost: 10 State: P-2-P, Type: Sham
Timers: Hello 10 , Dead 40 , Retransmit 5 , Transmit Delay 1
Table 1-19 display ospf sham-link area
command output description
Field
Description
Sham-Link
Sham link expressed in the format of source IP address to
destination IP address
Neighbour State
Status of the sham link neighbor
Area
Destination IP address of the sham link
Cost
Cost of the sham link
State
Status of the sham link
Type
Type of the sham link
Timers
Timers of the sham link