3Com S7902E Command Reference Manual - page 1769
1-28
service-type lan-access
Syntax
service-type lan-access
undo service-type lan-access
View
Local user view
Default Level
2: System level
Parameters
None
Description
Use the
service-type lan-access
command to specify the lan-access service for an Ethernet access
user, for example 802.1X user.
Use the
undo service-type lan-access
command to remove the lan-access service settings for the
user.
By default, no service is authorized to users.
Examples
# Specify the lan-access service for a user.
[Sysname] local-user user1
[Sysname-luser-user1] service-type lan-access
state
Syntax
state
{
active
|
block
}
View
ISP domain view, local user view
Default Level
2: System level
Parameters
active
: Places the current ISP domain or local user in the active state, allowing the users in the current
ISP domain or the current local user to request network services.
block
: Places the current ISP domain or local user in the blocked state, preventing users in the current
ISP domain or the current local user from requesting network services.