3Com S7902E Command Reference Manual - page 1081
1-11
Description
Use the
display ip as-path
command to display BGP AS-PATH list information.
Information about all BGP AS-PATH lists will be displayed if no
as-path-number
is specified.
Related commands:
ip as-path
,
if-match as-path
,
apply as-path
.
Examples
# Display the information of BGP AS-PATH list 1.
ListID Mode Expression
1 permit 2
Table 1-1
display ip as-path
command output description
Field
Description
ListID
AS-PATH list ID
Mode
Matching mode: permit, deny
Expression
Regular expression for matching
display ip community-list
Syntax
display ip community-list
[
basic-community-list-number
|
adv-community-list-number
]
View
Any view
Default Level
1: Monitor level
Parameters
basic-community-list-number
: Basic community list number, in the range of 1 to 99.
adv-community-list-number
: Advanced community list number, in the range of 100 to 199.
Description
Use the
display ip community-list
command to display BGP community list information.
All BGP community list information will be displayed if no
basic-community-list-number
or
adv-community-list-number
is specified.
Related commands:
ip community-list
,
if-match community
,
apply community
.
Examples
# Display the information of the BGP community list 1.
Community List Number 1
permit 1:1 1:2 2:2