3Com S7902E Command Reference Manual - page 189
1-26
View
Ethernet interface view, port group view
Default level
2: System level
Parameters
all
: Sends all the basic LLDP TLVs, all the IEEE 802.1 defined LLDP TLVs, or all the IEEE 802.3 defined
LLDP TLVs; or sends all the MED related LLDP TLVs except location identification TLVs.
basic-tlv
: Sends basic LLDP TLVs.
port-description
: Sends port description TLVs.
system-capability
: Sends system capabilities TLVs.
system-description
: Sends system description TLVs.
system-name
: Sends system name TLVs.
dot1-tlv
: Sends IEEE 802.1 defined LLDP TLVs.
port-vlan-id
: Sends port VLAN ID TLVs.
protocol-vlan-id
: Sends port and protocol VLAN ID TLVs.
vlan-name
: Sends VLAN name TLVs.
vlan-id
: ID of the VLAN the TLVs (port and protocol VLAN ID TLVs or VLAN name TLVs) concerning
which are to be sent. This argument defaults to the least protocol VLAN ID.
dot3-tlv
: Sends IEEE 802.3 defined LLDP TLVs.
link-aggregation
: Sends link aggregation group TLVs.
mac-physic
: Sends MAC/PHY configuration/status TLVs.
max-frame-size
: Sends maximum frame size TLVS.
power
: Sends power via MDI TLVs.
med-tlv
: Sends MED related LLDP TLVs.
capability
: Sends LLDP-MED capabilities TLVs.
inventory
: Sends hardware revision TLVs, firmware revision TLVs, software revision TLVs, serial
number TLVs, manufacturer name TLVs, model name TLVs, and asset ID TLVs.
location-id
: Sends location identification TLVS.
civic-address
: Inserts the address information about the intermediate device in location identification
TLVs .
device-type
: Device type value. A value of 0 specifies DHCP server; a value of 1 specifies switch, and a
value of 2 specifies LLDP-MED endpoint.
country-code
: Country code, confirming to ISO 3166.
{
ca-type ca-value
}&: Configures address information, where
ca-type
represents the address
information type, in the range 0 to 255,
ca-value
represents address information, a string of 1 to 250
characters, and & indicates that you can enter up to ten such parameters.
elin-address
: Inserts telephone numbers for urgencies in location identification TLVs.
tel-number
: Telephone number for urgencies, a string of 10 to 25 characters.
network-policy
: Sends network policy TLVs.