3Com S7902E Command Reference Manual - page 130
1-10
Parameters
port-priority
: LACP port priority, in the range of 0 to 65535.
Description
Use the
lacp
port
-
priority
command to set the LACP priority of a port.
Use the
undo
lacp
port
-
priority
command to restore the default.
The default LACP priority of a port is 32768.
Examples
# Set the LACP priority of Ethernet 1/0 to 64.
[Sysname] interface ethernet 2/0/1
[Sysname-Ethernet2/0/1] lacp port-priority 64
lacp system-priority
Syntax
lacp
system-priority
system-priority
undo
lacp
system-priority
View
System view
Default Level
2: System level
Parameters
system-priority
: LACP priority of the local system, in the range of 0 to 65535.
Description
Use the
lacp
system
-
priority
command to set the LACP priority of the local system.
Use the
undo
lacp
port
-
priority
command to restore the default.
By default, the system LACP priority is 32768.
Examples
# Set the system LACP priority to 64.
[Sysname] lacp system-priority 64
link-aggregation mode
Syntax
link-aggregation mode dynamic
undo link-aggregation mode