3Com S7902E Command Reference Manual - page 469
1-1
1
Port Mirroring Configuration Commands
Port Mirroring Configuration Commands
display mirroring-group
Syntax
display mirroring-group
{
group-id
|
all
|
local
|
remote-destination
|
remote-source
}
View
Any view
Default Level
2: System level
Parameters
group-id
: Port mirroring group number, in the range of 1 to 4.
all
: Specifies all the port mirroring groups.
local
: Specifies local port mirroring groups.
remote-destination
: Specifies remote destination port mirroring groups.
remote-source
: Specifies remote source port mirroring groups.
Description
Use the
display mirroring-group
command to display the information about a port mirroring group or
multiple port mirroring groups.
The output information varies with port mirroring group type and is organized by mirroring group
numbers.
Examples
# Display the information about all the port mirroring groups.
mirroring-group 1:
type: local
status: active
mirroring port:
GigabitEthernet2/0/1 both
monitor port: GigabitEthernet2/0/10
mirroring-group 2:
type: remote-source
status: active
mirroring port:
GigabitEthernet2/0/3 both