3Com S7902E Command Reference Manual - page 1695
2-13
Default Level
2: System Level
Parameters
drop-precedence-value
: Drop precedence to be set for packets, in the range 0 to 2.
Description
Use the
remark drop-precedence
command to configure the action of setting drop precedence for a
traffic behavior.
Use the
undo remark drop-precedence
command to remove the action of setting drop precedence.
Related commands:
qos policy
,
traffic behavior
,
classifier behavior
.
Examples
# Configure the action to set drop precedence to 2 for a traffic behavior.
[Sysname] traffic behavior database
[Sysname-behavior-database] remark drop-precedence 2
remark dscp
Syntax
remark dscp
dscp-value
undo remark dscp
View
Traffic behavior view
Default Level
2: System Level
Parameters
dscp-value
: DSCP precedence to be set for packets, in the range of 0 to 63. This argument can also be
the keywords listed in
Table 2-4
.
Table 2-4
DSCP keywords and values
Keyword
DSCP value (binary)
DSCP value (decimal)
default 000000 0
af11 001010
10
af12 001100
12
af13 001110
14
af21 010010
18
af22 010100
20
af23 010110
22
af31 011010
26