3Com S7902E Command Reference Manual - page 1882
1-1
1
IP Source Guard Configuration Commands
IP Source Guard Configuration Commands
display ip check source
Syntax
display ip check source
[
interface interface-type interface-number
|
ip-address ip-address
|
mac-address
mac-address
]
View
Any view
Default Level
1: Monitor level
Parameters
interface interface-type interface-number
: Displays the dynamic bindings of the interface specified by
its type and number.
ip-address ip-address
: Displays the dynamic bindings of an IP address.
mac-address mac-address
: Displays the dynamic bindings of an MAC address (in the format of
H-H-H).
Description
Use the
display ip check source
command to display dynamic bindings.
With no options specified, the command displays the dynamic bindings of all interfaces.
Related commands:
ip check source
.
Examples
# Display all dynamic bindings.
Total entries found: 3
MAC IP Vlan Port Status
040a-0000-4000 10.1.0.9 2 Ethernet2/0/1 DHCP-SNP
N/A 10.1.0.8 2 Ethernet2/0/1 DHCP-SNP
040a-0000-2000 10.1.0.7 2 Ethernet2/0/1 DHCP-SNP