3Com S7902E Command Reference Manual - page 1697
2-15
Description
Use the
remark ip-precedence
command to configure the action of setting IP precedence for a traffic
behavior.
Use the
undo remark ip-precedence
command to remove the action of setting IP precedence.
Related commands:
qos policy
,
traffic behavior
,
classifier behavior
.
Examples
# Configure the action to set IP precedence to 6 for a traffic behavior.
[Sysname] traffic behavior database
[Sysname-behavior-database] remark ip-precedence 6
remark local-precedence
Syntax
remark local-precedence
local-precedence
undo remark local-precedence
View
Traffic behavior view
Default Level
2: System Level
Parameters
local-precedence
: Local precedence to be set for packets, in the range of 0 to 7.
Description
Use the
remark local-precedence
command to configure the action of setting local precedence for a
traffic behavior.
Use the
undo remark local-precedence
command to remove the action of remarking local
precedence.
Note that, when the
remark dot1p
command is used together with the
remark local-precedence
command, the 802.1p precedence to be set for packets must be the same as the local precedence to be
set for packets. Otherwise, the corresponding policy cannot be applied successfully.
Related commands:
qos policy
,
traffic behavior
,
classifier behavior
.
Examples
# Configure the action to set local precedence to 2 for a traffic behavior.
[Sysname] traffic behavior database
[Sysname-behavior-database] remark local-precedence 2