3Com S7902E Command Reference Manual - page 122
1-2
Examples
# Set the description of interface Bridge-aggregation 1 to
link-aggregation interface
.
[Sysname] interface bridge-aggregation 1
[Sysname-Bridge-Aggregation1] description link-aggregation interface
display lacp system-id
Syntax
display lacp system-id
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the
display lacp system-id
command to display the system ID of the local system (that is, the
actor). The ID comprises the system LACP priority and the system MAC address.
Examples
# Display the local system ID.
Actor System ID: 0x8000, 000f-e200-0100
Table 1-1 display lacp system-id
command output description
Field
Description
Actor System ID
The local system ID, which comprises the LACP
system priority and the system MAC address.
display link-aggregation member-port
Syntax
display link-aggregation member-port
[
interface-type interface-number
[
to interface-type
interface-number
] ]
View
Any view
Default Level
1: Monitor level