- DL manuals
- 3Com
- Switch
- S7902E
- Command Reference Manual
3Com S7902E Command Reference Manual - page 2009
of
2327
Go
1-18
View
Any view
Default Level
0: Visit level (in user view)
2: System level (in other views)
Parameters
None
Description
Use the
quit
command to exit to a lower-level view. If the current view is user view, the
quit
command
terminates the current connection and exit the device.
Examples
# Switch from Ethernet 2/0/1 interface view to system view, and then to user view.
[Sysname-Ethernet2/0/1] quit
[Sysname] quit
return
Syntax
return
View
Any view except user view
Default Level
2: System level
Parameters
None
Description
Use the
return
command to return to user view from current view, as you do with the hot key
Ctrl+Z
.
Related commands:
quit
.
Examples
# Return to user view from Ethernet2/0/1 view.
[Sysname-Ethernet2/0/1] return