3Com S7902E Command Reference Manual - page 903
1-39
Examples
# In BGP view, configure route 10.0.0.0/16 as a shortcut route.
[Sysname] bgp 100
[Sysname-bgp] network 10.0.0.0 255.255.0.0 short-cut
# In BGP-VPN instance view, configure route 10.0.0.0/16 as a shortcut route. (the VPN has been
created).
[Sysname] bgp 100
[Sysname-bgp] ipv4-family vpn-instance vpn1
[Sysname-bgp-vpn1] network 10.0.0.0 255.255.0.0 short-cut
peer advertise-community (BGP/BGP-VPN instance view)
Syntax
peer
{
group-name
|
ip-address
}
advertise-community
undo peer
{
group-name
|
ip-address
}
advertise-community
View
BGP view/BGP-VPN instance view
Default Level
2: System level
Parameters
group-name
: Name of a peer group, a string of 1 to 47 characters.
ip-address
: IP address of a peer.
Description
Use the
peer advertise-community
command to advertise the community attribute to a peer/peer
group.
Use the
undo peer advertise-community
command to disable the community attribute advertisement
to a peer/peer group.
By default, no community attribute is advertised to any peer group/peer.
Related commands:
ip community-list, if-match community
,
apply community
(refer to
Routing
Policy Commands
in the
IP Routing Volume
).
Examples
# In BGP view, advertise the community attribute to peer group
test
.
[Sysname] bgp 100
[Sysname-bgp] peer test advertise-community
# In BGP-VPN instance view, advertise the community attribute to peer group
test
(the VPN has been
created).