3Com S7902E Command Reference Manual - page 515
1-6
Use the
undo dhcp server ip-pool
command to remove the specified DHCP address pool.
By default, no DHCP address pool is created.
Related commands:
dhcp enable
.
Examples
# Create the DHCP address pool identified by 0.
[Sysname] dhcp server ip-pool 0
[Sysname-dhcp-pool-0]
dhcp server ping packets
Syntax
dhcp server ping
packets
number
undo dhcp server ping
packets
View
System view
Default Level
2: System level
Parameters
number
: Number of ping packets, in the range of 0 to 10. 0 means no ping operation.
Description
Use the
dhcp server ping
packets
command to specify the maximum number of ping packets on the
DHCP server.
Use the
undo dhcp server ping packets
command to restore the default.
The number defaults to 1.
Examples
# Specify the maximum number of ping packets as 10.
[Sysname] dhcp server ping packets 10
dhcp server ping timeout
Syntax
dhcp server ping
timeout
milliseconds
undo dhcp server ping
timeout
View
System view