3Com S7902E Command Reference Manual - page 1971
1-10
3Com S7900E Series Ethernet Switches only support
none
keyword.
Examples
# Configure software flow control on AUX port.
System View: return to User View with Ctrl+Z.
[Sysname] user-interface aux 0
[Sysname-ui-aux0] flow-control none
free user-interface
Syntax
free user-interface
[
type
]
number
View
User view
Default Level
3: Manage level
Parameters
type
: User interface type.
number
: Absolute user interface index or relative user interface index.
z
Relative user interface index: If you provide the
type
argument,
number
indicates the user interface
index of the type. When the type is AUX, the
number
is 0; when the type is VTY, the
number
ranges
from 0 to 4.
z
Absolute user interface index: If you do not provide the
type
argument,
number
indicates absolute
user interface index, which ranges from 0 to 5.
Description
Use the
free user-interface
command to clear a specified user interface. If you execute this command,
the corresponding user interface will be disconnected.
Note that the current user interface can not be cleared.
Examples
# Log into user interface 0 and clear user interface 1.
Are you sure to free user-interface vty0
[Y/N]y
[OK]
After you execute this command, user interface 1 will be disconnected. The user in it must log in again
to connect to the switch.