3Com S7902E Command Reference Manual - page 1545
1-13
Default Level
1: Monitor level
Parameters
vpn-instance-name
: Name of the VPN instance, a case-sensitive string of 1 to 31 characters.
|
: Uses a regular expression to filter the output information. For details about regular expression, refer to
Basic System Configuration
in the
System
Volume
.
begin
: Displays all lines starting with the line that matches the regular expression.
exclude
: Displays all lines other than those matching the regular expression..
include
: Displays all lines matching the regular expression.
regular-expression
: Regular expression, a case-sensitive string of 1 to 80 characters.
Description
Use the
display mpls ldp vpn-instance
command to display information about a specified LDP
instance.
Related commands:
mpls ldp
(system view),
mpls ldp
(interface view).
Examples
# Display information about the LDP instance corresponding to VPN instance
vpn1
.
LDP Global Information
--------------------------------------------------------------------
Protocol Version : V1 Neighbor Liveness : 60 Sec
Graceful Restart : Off FT Reconnect Timer : 60 Sec
MTU Signaling : Off Recovery Timer : 60 Sec
LDP Instance Information
--------------------------------------------------------------------
Instance ID : 1 VPN-Instance : vpn1
Instance Status : Active LSR ID : 1.1.1.9
Hop Count Limit : 32 Path Vector Limit : 32
Loop Detection : Off
DU Re-advertise Timer : 30 Sec DU Re-advertise Flag : On
DU Explicit Request : Off Request Retry Flag : On
Label Distribution Mode : Ordered Label Retention Mode : Liberal
For description on the fields of the command output, see
Table 1-3
.