3Com S7902E Command Reference Manual - page 1721
4-3
qos wred apply
Syntax
qos wred apply
table-name
undo qos wred apply
View
Interface view, port group view
Default Level
2: System Level
Parameters
table-name
: Name of a global WRED table.
Description
Use the
qos wred apply
command to apply a WRED table to the current port or port group.
Use the
undo qos wred apply
command to cancel the application.
By default, no WRED table is applied to any port or port group.
Related commands:
display qos wred interface
.
Examples
# Apply the WRED table
queue-table1
to the GigabitEthernet 2/0/1.
[Sysname] interface GigabitEthernet 2/0/1
[Sysname-GigabitEthernet2/0/1] qos wred apply queue-table1
qos wred queue table
Syntax
qos wred
queue
table
table-name
undo qos wred table
table-name
View
System view
Default Level
2: System Level
Parameters
table
table-name
: Specifies a name for the table, a string of 1 to 32 characters..
Description
Use the
qos wred queue table
command to create a WRED table and enter WRED table view.
Use the
undo
qos wred table
command to remove a WRED table.