3Com S7902E Command Reference Manual - page 1259
1-23
Refer to
Table 1-8
for description on the fields above.
display bgp multicast routing-table dampened
Syntax
display bgp multicast routing-table dampened
View
Any view
Default Level
2: Monitor level
Parameters
None
Description
Use the
display bgp multicast routing-table dampened
command to display dampened IPv4 MBGP
routes.
Examples
# Display dampened IPv4 MBGP routes.
BGP Local router ID is 2.2.2.2
Status codes: * - valid, > - best, d - damped,
h - history, i - internal, s - suppressed, S - Stale
Origin : i - IGP, e - EGP, ? - incomplete
Network From Reuse Path/Origin
*d 77.0.0.0 12.1.1.1 00:29:20 100?
Table 1-9 display bgp multicast routing-table dampened
command output description
Field
Description
From
IP address from which the route was received
Reuse
Reuse time of the route
Refer to
Table 1-8
for description on the other fields above.
display bgp multicast routing-table dampening parameter
Syntax
display bgp multicast routing-table dampening parameter
View
Any view