3Com S7902E Command Reference Manual - page 1362
1-23
reset mld group port-info
Syntax
reset mld group port-info
{
all
|
ipv6-group-address
} [
vlan vlan-id
]
View
User view
Default Level
2: System level
Parameters
all
: Clears Layer 2 port information of all the MLD multicast groups.
Ipv6-group-address
: Clears Layer 2 port information of the specified MLD multicast group. The effective
range of
group-address
is FFxy::/16, where x and y represent any hexadecimal number between 0 and
F, inclusive.
vlan-id
: Clear Layer 2 port information of MLD multicast groups in the specified VLAN. The effective
range of
vlan-id
is 1 to 4094.
Description
Use the
reset mld group port-info
command to clear Layer 2 port information of MLD multicast
groups.
Note that:
z
Layer 2 ports for MLD multicast groups include member ports and router ports.
z
This command cannot clear Layer 2 port information about MLD multicast groups of static joins.
Related commands:
display mld group port-info
.
Examples
# Clear Layer 2 port information of all MLD multicast groups in all VLANs.
# Clear Layer 2 port information of all MLD multicast groups in VLAN 100.
# Clear Layer 2 port information about multicast group FF03::101:10 in VLAN 100.
reset mld ssm-mapping group
Syntax
reset mld ssm-mapping group
{
all
|
interface
interface-type interface-number
{
all
|
ipv6-group-address
[
prefix-length
]
[
ipv6-source-address
[
prefix-length
] ] } }
View
User view