3Com S7902E Command Reference Manual - page 1179
1-22
Description
Use the
display pim neighbor
command to view the PIM neighbor information.
Note that if neither
all-instance
nor
vpn-instance
is specified, this command will display the
information on the public instance.
Examples
# View the information of all PIM neighbors in the public instance.
VPN-Instance: public net
Total Number of Neighbors = 2
Neighbor Interface Uptime Expires Dr-Priority
10.1.1.2 Vlan1 02:50:49 00:01:31 1
20.1.1.2 Vlan2 02:49:39 00:01:42 1
# In the public instance, view the detailed information of the PIM neighbor whose IP address is
11.110.0.20.
VPN-Instance: public net
Neighbor: 11.110.0.20
Interface: Vlan-interface3
Uptime: 00:00:10
Expiry time: 00:00:30
DR Priority: 1
Generation ID: 0x2ACEFE15
Holdtime: 105 s
LAN delay: 500 ms
Override interval: 2500 ms
State refresh interval: 60 s
Neighbor tracking: Disabled
Table 1-8 display pim neighbor
command output description
Field
Description
VPN-Instance: public net
Public instance
Total Number of Neighbors
Total number of PIM neighbors
Neighbor
IP address of the PIM neighbor
Interface
Interface connecting the PIM neighbor
Uptime
Length of time for which the PIM neighbor has been up, in
hh:mm:ss
Expires/Expiry time
Remaining time of the PIM neighbor, in hh:mm:ss; “never”
means that the PIM neighbor is always up and reachable.
Dr-Priority/DR Priority
Priority of the PIM neighbor
Generation ID
Generation ID of the PIM neighbor (a random value
indicating a status change of the PIM neighbor)
Holdtime
Holdtime of the PIM neighbor; “forever” means that the
PIM neighbor is always up and reachable