3Com S7902E Command Reference Manual - page 485
1-4
specified type is displayed; with both the interface type and interface number specified, only the
information about the specified interface is displayed.
Related commands:
display ip interface
.
Examples
# Display brief information about VLAN interfaces.
*down: administratively down
(s): spoofing
Interface Physical Protocol IP Address Description
Vlan-interface1 up up 6.6.6.6 Vlan-inte...
Vlan-interface2 up up 7.7.7.7 VLAN2
Table 1-2 display ip interface brief
command output description
Field
Description
*down: administratively down
The interface is administratively shut down with the
shutdown
command.
(s) : spoofing
Spoofing attribute of the interface. It indicates that an interface
whose network layer protocol is displayed up may have no link
present or the link is set up only on demand.
Interface Interface
name
Physical
Physical state of the interface, which can be
z
*down: Indicates that the interface is administratively down; that
is, the interface is shut down with the
shutdown
command.
z
down: Indicates that the interface is administratively up but its
physical state is down, which may be caused by a connection or
link failure.
up: Indicates that both the administrative and physical states of the
interface are up.
Protocol
Link layer protocol state of the interface, which can be
z
down: Indicates that the protocol state of the interface is down,
which is usually because that no IP address is assigned to the
interface.
z
up: Indicates that the protocol state of the interface is up.
IP Address
IP address of interface (If no IP address is configured, “unassigned”
is displayed.)
Description
Interface description information, for which at most 12 characters
can be displayed. If there are more that 12 characters, only the first
nine characters are displayed.
ip address
Syntax
ip
address
ip-address
{
mask | mask-length
} [
sub
]
undo ip address
[
ip-address
{
mask | mask-length
} [
sub
] ]