3Com S7902E Command Reference Manual - page 247
1-6
Description
Use the
display gvrp local-vlan interface
command to display the local VLAN information maintained
by GVRP on the specified port.
Examples
# Display the local VLAN information maintained by GVRP on GigabitEthernet 2/0/1.
Following VLANs exist in GVRP local database:
1(default),2-500
// The information above shows that GVRP maintains the information about VLAN 1, VLAN 2 through
VLAN 500, which GigabitEthernet 2/0/1 belongs to.
display gvrp state
Syntax
display gvrp state
interface
interface-type interface-number vlan
vlan-id
View
Any view
Default Level
0: Visit level
Parameters
interface interface-type interface-number
: Specifies an interface by its type and number.
vlan
vlan-id
: Specifies a VLAN ID, in the range of 1 to 4094.
Description
Use the
display gvrp state
command to display the current GVRP state.
Examples
# Display the GVRP state of VLAN 1, which GigabitEthernet 2/0/1 belongs to.
GVRP state of VLAN 1 on port GigabitEthernet2/0/1
Applicant state machine : VP
Registrar state machine : MTR
display gvrp statistics
Syntax
display gvrp statistics
[
interface interface-list
]
View
Any view