3Com S7902E Command Reference Manual - page 1269
1-33
Examples
# In IPv4 MBGP address family view, advertise the community attribute to the existing peer group
test
.
[Sysname]bgp 100
[Sysname-bgp]group test external
[Sysname-bgp]peer test as-number 200
[Sysname-bgp]ipv4-family multicast
[Sysname-bgp-af-mul] peer test enable
[Sysname-bgp-af-mul] peer test advertise-community
peer advertise-ext-community (MBGP family view)
Syntax
peer
{
group-name
|
ip-address
}
advertise-ext-community
undo peer
{
group-name
|
ip-address
}
advertise-ext-community
View
IPv4 MBGP address family view
Default Level
2: System level
Parameters
group-name
: Name of an IPv4 MBGP peer group, a string of 1 to 47 characters.
ip-address
: IP address of an IPv4 MBGP peer.
Description
Use the
peer advertise-ext-community
command to advertise the extended community attribute to a
peer/peer group.
Use the
undo peer advertise-ext-community
command to disable the extended community attribute
advertisement to a peer/peer group.
By default, no extended community attribute is advertised to a peer/peer group.
For related information, refer to the
ip extcommunity-list
,
if-match extcommunity
and
apply
extcommunity
commands in
Route policy Commands
of the
IP Routing Volume
.
Examples
# In IPv4 MBGP address family view, advertise the extended community attribute to the existing peer
group
test
.
[Sysname]bgp 100
[Sysname-bgp]group test external
[Sysname-bgp]peer test as-number 200
[Sysname-bgp]ipv4-family multicast
[Sysname-bgp-af-mul] peer test enable
[Sysname-bgp-af-mul] peer test advertise-ext-community