3Com S7902E Command Reference Manual - page 1468
1-46
Description
Use the
reset bgp ipv6 multicast
command to reset specified IPv6 MBGP connections to reconnect to
the peers.
Examples
# Reset all the IPv6 MBGP connections.
reset bgp ipv6 multicast dampening
Syntax
reset bgp ipv6 multicast dampening
[
ipv6-address
prefix-length
]
View
User view
Default Level
1: Monitor level
Parameters
ipv6-address
: Destination IPv6 address..
prefix-length
: Prefix length of the IPv6 address, in the range 0 to 128.
Description
Use the
reset bgp ipv6 multicast dampening
command to clear route dampening information and
release suppressed routes.
If no
ipv6-address prefix-length
is specified, all IPv6 MBGP route dampening information will be
cleared.
Examples
# Clear the damping information of the route 2345::/64 and release the suppressed route.
reset bgp ipv6 multicast flap-info
Syntax
reset bgp ipv6 multicast flap-info
[
ipv6-address/prefix-length
|
regexp as-path-regexp
|
as-path-acl
as-path-acl-number
]
View
User view
Default Level
1: Monitor level