3Com S7902E Command Reference Manual - page 840
1-41
[Sysname] interface vlan-interface 10
[Sysname-Vlan-interface10] isis dis-priority 127 level-2
isis enable
Syntax
isis enable
[
process-id
]
undo
isis enable
View
Interface view
Default Level
2: System level
Parameters
process-id
: Specifies a IS-IS process ID, ranging from 1 to 65535. The default is 1.
Description
Use the
isis enable
command to enable an IS-IS process on the interface.
Use the
undo isis enable
command to disable IS-IS.
No IS-IS routing process is enabled on an interface by default.
Related commands:
isis
,
network-entity
.
Examples
# Create IS-IS routing process 1, and enable the IS-IS routing process on VLAN-interface 10.
[Sysname] isis 1
[Sysname-isis-1] network-entity 10.0001.1010.1020.1030.00
[Sysname-isis-1] quit
[Sysname] interface vlan-interface 10
[Sysname-Vlan-interface10] isis enable 1
isis mesh-group
Syntax
isis mesh-group
{
mesh-group-number
|
mesh-blocked
}
undo isis mesh-group
View
Interface view
Default Level
2: System level