3Com S7902E Command Reference Manual - page 2140
1-3
Examples
# Display the configuration of RMON event table.
EventEntry 1 owned by user1 is VALID.
Description: null.
Will cause log-trap when triggered, last triggered at 0days 00h:02m:27s.
Table 1-2 display rmon event
command output description
Field
Description
EventEntry
Event entry, corresponding to the MIB node eventIndex.
owned by
Owner of the entry, corresponding to the MIB node
eventOwner.
VALID
Status of the entry identified by the index (VALID means
the entry is valid, and UNDERCREATION means invalid.
You can use the
display rmon
command to view the
invalid entry; while with the
display
current-configuration
and
display this
commands you
cannot view the corresponding
rmon
commands.),
corresponding to the MIB node eventStatus.
Description
Description for the event, corresponding to the MIB node
eventDescription.
cause log-trap when triggered
The actions that the system will take when the event is
triggered:
z
none: The system will take no action
z
log: The system will log the event
z
snmp-trap: The system will send a trap to the NMS
z
log-and-trap: The system will log the event and send a
trap to the NMS
This field corresponds to the MIB node eventType.
last triggered at
Time when the last event was triggered, corresponding to
the MIB node eventLastTimeSent.
display rmon eventlog
Syntax
display rmon eventlog
[
entry-number
]
View
Any view
Default Level
1: Monitor level
Parameters
entry-number
: Index of an event entry, in the range 1 to 65535. If no entry number is specified, the log
information for all event entries is displayed.