3Com S7902E Command Reference Manual - page 336
1-26
port hybrid vlan
Syntax
port hybrid
vlan
vlan-id-list
{
tagged
|
untagged
}
undo port hybrid
vlan
vlan-id-list
View
OLT port view
Default Level
2: System level
Parameters
vlan-id-list
: VLANs that the hybrid ports will be assigned to. This argument is expressed in the format of
[
vlan-id1
[
to
vlan-id2
] ]&, where
vlan-id
ranges from 1 to 4094 and & indicates that you
can specify up to 10 VLAN IDs or VLAN ID ranges. Be sure that the specified VLANs already exist.
tagged
: Configures the hybrid port to send the packets of the specified VLAN(s) with the tags kept.
untagged
: Configures the hybrid port to send the packets of the specified VLAN(s) with the tags
removed.
Description
Use the
port hybrid vlan
command to assign the current hybrid port to the specified VLAN(s).
Use the
undo port hybrid vlan
command to remove the current hybrid port from the specified
VLAN(s).
By default, a hybrid port only allows packets from VLAN 1 to pass through untagged.
A hybrid port can carry multiple VLANs. If you execute the
port hybrid
vlan
command multiple times,
the VLANs the hybrid port carries are the set of VLANs specified by
vlan-id-list
in each execution.
Related commands:
port link-type
,
port hybrid pvid vlan
.
Examples
# Assign the hybrid port OLT 3/0/1 to VLAN 2, VLAN 4, and VLAN 50 through VLAN 100, and configure
OLT 3/0/1 to send packets of these VLANs with tags kept.
[Sysname] interface olt 3/0/1
[Sysname-Olt3/0/1] port link-type hybrid
[Sysname-Olt3/0/1] port hybrid vlan 2 4 50 to 100 tagged
port link-type hybrid
Syntax
port link-type hybrid
View
OLT port view