3Com S7902E Command Reference Manual - page 712
1-12
undo import-route protocol
[
process-id
]
View
RIP view
Default Level
2: System level
Parameters
protocol
: Specifies a routing protocol from which to redistribute routes. At present, it can be
bgp
,
direct
,
isis
,
ospf
,
rip
, or
static
.
process-id
: Process ID, in the range of 1 to 65535. The default is 1. It is available only when the protocol
is
isis
,
rip
, or
ospf
.
all-processes
: Enables route redistribution from all the processes of a protocol. This keyword takes
effect only when the protocol is
rip
,
ospf
, or
isis
.
allow-ibgp
: When the
protocol
argument is set to
bgp
,
allow-ibgp
is an optional keyword. The
import-route bgp
command only redistributes eBGP routes, while the
import-route bgp allow-ibgp
command additionally redistributes iBGP routes, which may cause routing loops. Be cautious when
using it.
cost
: Cost for redistributed routes, in the range of 0 to 16. If
cost
is not specified, the default cost
specified by the
default cost
command applies.
tag
: Tag marking redistributed routes, in the range of 0 to 65,535. The default is 0.
route-policy
route-policy-name
: Specifies a routing policy with 1 to 19 characters.
Description
Use the
import-route
command to enable route redistribution from another routing protocol.
Use the
undo import-route
command to disable route redistribution.
By default, RIP does not redistribute routes from other routing protocols.
Note that:
z
Only active routes can be redistributed. You can use the display ip routing-table protocol command
to display route state information.
z
You can specify a routing policy using the keyword
route-policy
to redistribute only the specified
routes.
z
You can configure a cost for redistributed routes using the keyword
cost
.
z
You can configure a tag value for redistributed routes using the keyword
tag
.
Related commands:
default cost
.
Examples
# Redistribute static routes, and set the cost to 4.
[Sysname] rip 1
[Sysname-rip-1] import-route static cost 4
# Set the default cost for redistributed routes to 3.
[Sysname-rip-1] default cost 3