3Com S7902E Command Reference Manual - page 527
1-18
Examples
# Specify WINS server address 10.12.1.99 in DHCP address pool 0.
[Sysname] dhcp server ip-pool 0
[Sysname-dhcp-pool-0] nbns-list 10.12.1.99
netbios-type
Syntax
netbios-type
{
b-node
|
h-node
|
m-node
|
p-node
}
undo netbios-type
View
DHCP address pool view
Default Level
2: System level
Parameters
b-node
: Broadcast node. A b-node client sends the destination name in a broadcast message. The
destination returns the name-to-IP mapping to the client after receiving the message.
p-node
: Peer-to-peer node. A p-node client sends the destination name in a unicast message to the
WINS server, and the WINS server returns the mapping to the client.
m-node
: Mixed node, a combination of a b-node first and p-node second. An m-node client broadcasts
the destination name, if there is no response, and then unicasts the destination name to the WINS
server to get the mapping.
h-node
: Hybrid node, a combination of a p-node first and b-node second. An h-node is a b-node with
the peer-to-peer communication mechanism. An h-node client unicasts the destination name to the
WINS server, if there is no response, and then broadcasts it to get the mapping from the destination.
Description
Use the
netbios-type
command to specify the client NetBIOS node type in a DHCP address pool.
Use the
undo netbios-type
command to remove the specified client NetBIOS node type.
By default, no NetBIOS node type is specified.
Related commands:
dhcp server ip-pool
,
nbns-list
.
Examples
# Specify the NetBIOS node type as b-node in DHCP address pool 0.
[Sysname] dhcp server ip-pool 0
[Sysname-dhcp-pool-0] netbios-type b-node