3Com S7902E Command Reference Manual - page 705
1-5
Field
Description
Silent interfaces
Number of silent interfaces, which do not periodically
send updates
Default routes
Indicates whether a default route is sent to RIP neighbors
z
only
means only a default route is advertised.
z
originate
means a default route is advertised along
with other routes.
z
disable
means no default route is advertised.
Default route cost
Cost of the default route
Verify-source
Indicates whether the source IP address is checked on
the received RIP routing updates
Networks
Networks enabled with RIP
Configured peers
Configured neighbors
Triggered updates sent
Number of sent triggered updates
Number of routes changes
Number of changed routes in the database
Number of replies to queries
Number of RIP responses
display rip database
Syntax
display rip
process-id database
View
Any view
Default Level
1: Monitor level
Parameters
process-id
: RIP process ID, in the range of 1 to 65535.
Description
Use the
display rip
database
command to display the active routes in the RIP database, which are
sent in normal RIP routing updates.
Examples
# Display the active routes in the database of RIP process 100.
10.0.0.0/8, cost 6, ClassfulSumm
10.0.0.0/8, cost 6, nexthop 192.168.0.37
192.168.0.0/24, cost 0, ClassfulSumm
192.168.0.0/24, cost 0, nexthop 192.168.0.73, Rip-interface