3Com S7902E Command Reference Manual - page 1146
1-22
By default, the IGMP last-member query interval is 1 second.
Related commands:
igmp last-member-query-interval
,
robust-count
,
display igmp interface
.
Examples
# Set the global IGMP last-member interval to 3 seconds in the public instance.
[Sysname] igmp
[Sysname-igmp] last-member-query-interval 3
max-response-time (IGMP view)
Syntax
max-response-time
interval
undo max-response-time
View
Public instance IGMP view, VPN instance IGMP view
Default Level
2: System level
Parameters
interval
: Maximum response time for IGMP general queries in seconds, with an effective range of 1 to
25.
Description
Use the
max-response-time
command to configure the maximum response time for IGMP general
queries globally.
Use the
undo max-response-time
command to restore the system default.
By default, the maximum response time for IGMP general queries is 10 seconds.
Related commands:
igmp max-response-time
,
timer other-querier-present
,
display igmp
interface
.
Examples
# Set the maximum response time for IGMP general queries to 8 seconds globally in the public
instance.
[Sysname] igmp
[Sysname-igmp] max-response-time 8
require-router-alert (IGMP view)
Syntax
require-router-alert
undo require-router-alert