3Com S7902E Command Reference Manual - page 1687
2-5
traffic classifier
Syntax
traffic classifier
classifier-name
[
operator
{
and
|
or
} ]
undo traffic classifier
classifier-name
View
System view
Default Level
2: System Level
Parameters
and
: Specifies the relationship among the rules in the class as logic AND. That is, a packet is matched
only when it matches all the rules defined for the class.
or
: Specifies the relationship among the rules in the class as logic OR. That is, a packet is matched if it
matches a rule defined for the class.
classifier-name
: Name of the class to be created.
Description
Use the
traffic classifier
command to create a class. This command also leads you to class view.
Use the
undo traffic classifier
command to remove a class.
By default, a packet is matched only when it matches all the rules configured for the class.
Examples
# Create a class named class 1.
[Sysname] traffic classifier class1
[Sysname-classifier-class1]
Traffic Behavior Configuration Commands
accounting
Syntax
accounting
undo accounting
View
Traffic behavior view
Default Level
2: System Level
Parameters
None