3Com S7902E Command Reference Manual - page 881
1-17
Field
Description
Origin attribute of the path:
i
Indicates the route is interior to the AS.
Summary routes and routes defined using the
network
command are
considered IGP routes.
e
Indicates that a route is learned from the exterior gateway protocol (EGP).
Origin
?
Short for INCOMPLETE. It indicates that the origin of a route is unknown and
the route is learned by other means.
display bgp peer
Syntax
display bgp peer
[
ip-address
{
log-info
|
verbose
} |
group-name
log-info
|
verbose
]
View
Any view
Default Level
1: Monitor level
Parameters
ip-address
: IP address of an peer to be displayed, in dotted decimal notation.
group-name
: Name of a peer group to be displayed, a string of 1 to 47 characters.
log-info
: Displays the log information of the specified peer.
verbose
: Displays the detailed information of the peer/peer group.
Description
Use the
display bgp peer
command to display peer/peer group information.
Examples
# Display the detailed information of the peer 10.110.25.20.
Peer: 10.110.25.20 Local: 2.2.2.2
Type: EBGP link
BGP version 4, remote router ID 1.1.1.1
BGP current state: Established, Up for 00h01m51s
BGP current event: RecvKeepalive
BGP last state: OpenConfirm
Port: Local - 1029 Remote - 179
Configured: Active Hold Time: 180 sec Keepalive Time: 60 sec
Received : Active Hold Time: 180 sec
Negotiated: Active Hold Time: 180 sec
Peer optional capabilities:
Peer support bgp multi-protocol extended